Embroidery table set (embroidery frame A4 + dedicated stand) 【EXPORT】EDDY WOODWORKS JAPAN

[Product name] Embroidery table set (EXPORT) / Export specificati 【Set of embroidery frame (A4 size) and dedicated stand】 [Accessories] 1 thread winder, 1 screw handle, 2 magnetic stoppers, 1 fastener Equipped with wooden round handle [Product features] ◇The embroidery frame holds the fabric between two wooden frames, and the fabric can be stretched by tightening the screws. ◇The stretched fabric is less likely to loosen and does not damage the fabric. ◇This embroidery frame is suitable for thin fabrics such as organza and linen. [Product Specifications] ◇Size of embroidery surface: 35cm x 26cm ◇Size when assembled: 36cm length x 45cm width x 14cm/16cm height ◇Weight: Embroidery frame (A4) 710g, dedicated stand 750g ◇Material: Pine wood (laminated wood) ◇The stand height can be set to two levels (14cm/16cm). ◇The embroidery frame can be set in either horizontal or vertical position. ◇The stand can be tilted freely (horizontal to 45 degrees) ◇The stand legs can be removed for compact storage. ◇The embroidery frame and stand legs have holes for thread spools. ◇The embroidery frame also has an awl hole for convenient thread twisting. [About upholstering the embroidery frame] ① First, loosen the screws on the fasteners of the outer frame sufficiently. ② Adjust the slack in the fabric and press it into the inner frame to sandwich the fabric between the two frames. ③ Tighten the 10 screws little by little in order. (As a guide, it should take about 2-3 turns) ※Please use the included screw handle. (Does not hurt your fingers) ④ Once upholstery is complete, set the fasteners of the embroidery frame to match the holes in the frame. ⑤ If you are setting the embroidery frame on the back, attach the included magnet to the round metal fitting. (The magnet will be held in place by the hole and the embroidery frame will not easily slip off) ⑥ You can set any A4, A5, or A6 size embroidery frame on this stand.